Victron Energy MultiPlus Compact 12 800 35-16 VE.Bus – CMP128010000 Sale
- Estimated Delivery : Up to 4 business days
- Free Shipping & Returns : On all orders over $200
Two AC Outputs
The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).
virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to achieve higher power output. Six 24 5000 120 units, for example, will provide 25 kW 30 kVA output power with 720 Amps charging capacity.
Three phase capability
In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW 90 kVA inverter and more than 2000 Amps charging capacity.
PowerControl – Dealing with limited generator, shore side or grid power
The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.
PowerAssist – Boosting the capacity of shore or generator power
This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.
Solar energy: AC power available even during a grid failure
The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.
System configuring
- In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.
- Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.
- Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).
- Color Control GX or other GX devices.
- Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.
Remote configuring
When connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely.
Brand Victron Energy
Manufacturer Part Number CMP128010000
Voltage 12V
Transfer Switch 16A
Cont. output power at 25 °C 800VA
Cont. output power at 40 °C 650W
Peak power 1600W
Efficiency 92%
Zero load power 8W
Charge Current House Battery 35A
Charge Current Starter Battery 4A (12V and 24V models only)
Battery Temperature Sensor Yes
Programmable Relay Yes
VE.Bus Communication Port For parallel and three phase operation, remote monitoring and system integration
Remote on-off Yes
Protection Category IP21
Battery-Connection Battery cables of 1.5 meter
Dimensions H375 x W214 x D110mm
Weight 10Kg
Warranty 5 Years
Country of Manufacture China
Title Default Title
Related products
Review Cart
Victron Energy MultiPlus Compact 12 800 35-16 VE.Bus – CMP128010000 Sale$165Select optionsVictron Energy MultiPlus Compact 12 800 35-16 VE.Bus – CMP128010000 Sale$165Select options
On-site Monitoring and control
Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).
Remote Monitoring and control
